Vacuum Inlets & Flow Control Valves
Industrial Vacuum Inlets & Flow Control Valves
| Industrial Inlets and Valves | Description | Details and Ø | Art. No. |
|---|---|---|---|
 |
Fully Automated Vacuum Inlet It consists of a zinc-plated hose hanger vacuum control valve and a switch using compressed air. The actuation mechanism and vacuum unit are activated when the hose is lifted from the hose hanger. |
Pipe 50 mm Hose 38 mm |
8101007 |
 |
Vacuum inlet attached to a zinc-plated hose hanger and pipe. The inlet slants outward at 45°. |
50 mm | 8102021 |
 |
Vacuum Inlet with/out Micro switch This vacuum inlet is made from durable glass-reinforced polyamide. It is fitted with flange and screw hole. |
50 mm, without micro switch 50 mm, with micro switch |
8102010 8102020 |
 |
Vacuum inlet attached to a zinc-plated pipe and wall fixture. | Pipe 50 mm | 8102022 |
 |
Sweep Inlet These models of sweep inlet have a large vacuum capacity. They are also designed for external fitting and made from zinc-plated sheet metal. They are used in combination with a separate flow control valve. |
50 mm 63 mm 76 mm |
8103050 8103063 8103067 |
 |
Flow Control Valves Equipped with a micro switch for the automatic start/stop of the vacuum unit, these valves can be activated manually or by compressed air. Electrical valves are also optional. They are available with a frame in zinc-plated sheet metal. |
Manual, 50x38 mm Manual, 50x50 mm Compressed air, 50x38 mm Compressed air, 50x50 mm |
8201038 8201050 8202038 8202050 |
 |
Manual, 63x63 mm Manual, 76x76 mm |
8201063 8201076 |
|
 |
Compressed air, 63x63 mm Compressed air, 76x76 mm |
8202063 8202076 |
Commercial Vacuum Inlets
| Commercial Inlets | Description | Details | Art. No. |
|---|---|---|---|
 |
Vacuum Inlets The AMBIANTE line is designed to fit inside the wall or the floor with the help of concealed pipes. The dimensions of the fixtures are 85x85 mm and they are available in both stainless steel and painted styles. The diameter is 50 mm for the plastic piping system and 32 mm for the hose. The inlets are also fitted using amounting bracket. *Products with a minimum quantity requirement |
Stainless steel for walls Stainless steel for floors White for walls, RAL 9001 White for walls, RAL 9016 White for walls, RAL 8019 |
8101001 8101002 8101003* 8101004* 8101005* |
 |
Mounting bracket Extension frame Trim plate |
8100101 8100102 8100103 |
|
 |
Sweep Inlet This sweep inlet is designed to be installed into the base of a wall and is made from stainless steel. It comes with a built-in actuation mechanism which can be operated by foot. |
50 mm | 8103012 |
| » Back to Products « |